LED fluorescent lights and fluorescent light bulb tube replacements, the DirectLED FL
Complete your
total transition to LED Technology
with the DirectLED
FL Series. The DirectLED FL series is a replacement
for traditional T8/T10/T12 fluorescent light tubes allowing you to
bring LED technology to
environments never before possible.
Key
DirectLED FL Series Benefits:
- Long Life:
50,000 + hour lifespan exceeds even the highest quality
fluorescents tubes
- Extreme
Efficiency: Over 80% more efficient than traditional
fluorescents tubes
- Flicker-Free
Lighting: Eliminate eye strain and headaches associated
with fluorescents lighting
- Shatter-Proof
Design: Will not break even if dropped
- Double
Energy Savings: DirectLED FL tubes require no ballast
saving even more energy
- No Mercury
Inside: Allows the use of tube lighting when mercury
contamination is not an option
- Flexible
Voltage: Use tube lighting in AC 85~277V
or DC 12V Input
- No
Interference: Perfect for settings where precise
instruments can be disturbed by fluorescent tubes
- Instant
Starting: Starts right away no matter the temperature or
conditions
Ballast
Free Installation For Even More Power Savings.
The DirectLED
FL Series does not require the use
of a ballast thus allowing you to save even more energy. As
an added benefit there is no ballast to break or fail
ensuring even longer life. No ballast also means that the
DirectLED FL can be used in T8, T10
or T12 fixtures for the ultimate
in compatibility. Installation is simple but does require
basic wiring knowledge. Simply disconnect or bypass the
ballast during installation to install the DirectLED FL. If
you do not feel comfortable with this type of basic wiring,
please call an electrician.
DirectLED FL Series for Task
Lighting
Task lighting
is required for visually intensive environments, such as
reading, writing or some kitchen counter top use. The great
light quality of DirectLED FL makes your task lighting more
effective and easier on your eyes. Locating DirectLED FL
underneath your cabinets, shelves, office cubicles etc, can
allow you to achieve an ideal task lighting setup.
Furthermore, the linear profile of DirectLED FL is also
unobtrusive to the design environment allowing them to be
integrated anywhere a standard fluorescent is used.
DirectLED FL Series for General
Illumination
EarthLED FL
series are well-suited for use anywhere: homes, offices,
museums, galleries, shop windows, hotels, restaurants,
meeting rooms, just like conventional fluorescent lights.
DirectLED
FL Series for Display Lighting and
Signage
Good light
quality and low heat generation makes DirectLED FL a great
green alternative for display lighting. No longer worry
about heat damage to your valuable merchandise displayed on
your counter. You will also be surprised at the ideal
display light cast by the quality light output of the
DirectLED FL Series.
Specifications
and Dimensions:
LED
T8/T10/T12
Power
Consumption:
8 Watts (2 Ft. / 60 CM)
15 Watts (4 Ft. / 120 CM)
24 Watts (6 Ft. / 183 CM)
Light Engine:
180 SuperBrite LED (2 Ft. / 60 CM)
300 SuperBrite LED (4 Ft. / 120 CM)
420 SuperBrite LED (6 Ft. / 183 CM)
Input Voltage: AC
110~277V or 12V DC
Luminous Flux:
800 Lumens (2 Ft. / 60 CM)
1500 Lumens (4 Ft. / 120 CM)
2400 Lumens (6 Ft. / 183 CM)
Color
Temperature: 3000 K (Warm), 6000 K (Cool)
CRI: 75 (Typical)
Lifespan: > 50,000 Hours (MTBF)
Operating Temperature: -4~104°F (-20~40ºC)
Construction: Frosted, impact resistant plastic &
integrated heat sink
Physical Dimensions: Diameter - 1.18 Inches (3 CM)
Base Types Available: Bi Pin T8, T10, T12 Compatible
Cost
to run for one year:
$2.34 (2 Ft. / 60 CM)
$4.38 (4 Ft. / 120 CM)
$7.01 (6 Ft. / 183 CM)
Calculated assuming 8 Hours a day operation,
365 Days a year with $.10 KWh Electricity Cost
|
