With SnackMiser™,
you can achieve maximum energy savings that result in
reduced operating costs and decreased greenhouse gas
emissions with your existing machines. Compatible with
non-refrigerated snack vending machines, SnackMiser™
incorporates innovative, energy-saving technology into a
small, plug-and-play device that installs in minutes.
On average, SnackMiser™ reduces energy consumption
annually per machine by $50. Reduces CO2 emissions by 470
lbs. and 770 grams of NOx*
* Based on
occupancy and the Energy Information Administration's
national average of greenhouse gas emissions and electricity
generation.
View
Brochure
How
It Works
|
|
SnackMiser™
SM150
|
SnackMiser™ SM150 Indoor Wall Mount w/ Occupancy Sensor
SnackMiser SM150 with PIR Occupancy Sensor. Wall-mounted
for indoor use. Use on non-refrigerated snack machines in
locations where snack machine placements are not subject to
change. Separate sensor assembly provides flexibility in
placement to achieve best occupancy detection.
Parts
Included:
1 SnackMiser Controller
1 Wall Mounting Plate
1 Indoor Occupancy Sensor w/ mounting bracket
|
|
|
|
|
|
SnackMiser™
SM151 |
SnackMiser™ SM151 Indoor Wall Mount w/ 10' Repeater Cable
SnackMiser SM151 Controller with internal Sensor Repeater. Wall
mount for indoor use. Use as secondary unit with a
SnackMiser SM150. Includes a 10' repeater cable to
connect to a SM150. Up to three SM151 units can be
connected to a SM150 for a total of four units controlled by
one sensor.
Parts
Included:
1 SnackMiser Controller
1 Wall Mounting Plate
1 10' Repeater Cable |
|
|
|
|
|
SnackMiser™
SM170 |
SnackMiser™
SM170 Indoor
EZ Mount Z-Bracket w/ Occupancy Sensor
SnackMiser SM170 with PIR Occupancy Sensor. EZ Mount
Z-Bracket for indoor use attaches directly to snack machine with
industrial strength Velcro. Installs quickly and allows
SnackMiser
to move with the machine. Use in locations
where snack machine placements are subject to change or if wall
mounting is not desired.
Parts
Included:
1 SM170 assembled and ready for installation
|
|
|
|
|
|
SnackMiser™
SM171 Indoor
|
SnackMiser™
SM171 Indoor
EZ Mount L-Bracket w/ 10' Repeater Cable
SnackMiser SM171 Controller with internal Sensor Repeater for
indoor use. Use as secondary unit with a SnackMiser CM170.
Includes a 10' repeater cable to connect to a SM150 or SM170.
Up to three SM171 secondary units can be connected to a primary
CoolerMiser for a total
of four units controlled by one sensor.
Parts Included:
1 SM171 ready for installation
1 10' Repeater Cable
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
